This workshop runs for six sessions and uses pre-purchased guitar kit. You will receive training on 3D Printing, Laser Engraving and ShopBot CNC Router. No materials are required.

Instructor John Zehren 
Six sessions  - Tuesdays, 6/24/25 through 7/29/25
5:30 pm - 8:00 pm 
Fab Lab 117A -117S
iMET Center
 

HAAS TRAINING

In this course, learners explore CNC machining concepts. They  examine setup and operation of CNC milling machines, and they  practice applying basic G code principles. Upon completion of the course, students will be able to program, setup, and operate a CNC mill.

Instructor Richard Shouse
Mon, Tues, Wed:  8/11/25 - 8/13/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

HAAS TRAINING
In this course, learners explore CNC machining concepts. They  examine the operation of CNC lathes and turning centers including  calling up programs, loading and unloading parts, inspecting parts, and monitoring tool wear. Upon completion of the course, students will be able to program, setup, and operate a CNC lathe.

Instructor Richard Shouse
Thurs, Fri, Sat  8/14/25 - 8/16/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

This course is designed for civilians who wish to
meet the training requirements to obtain a
concealed carry license.  This course meets the
training requirement specified in Wisconsin
Statute 175.60(4).

504-465E-1KDB
Saturday, 8/2/25
7:30 am - 2:00 pm
Kenosha Campus 
Academic Building 
Room G001
Questions?? Contact Jimmie Spino at spinoj@gtc.edu

In this workshop, participants apply their knowledge and skills of drone flying to various
inspection aspects related to construction. They develop drone flight paths to inspect and acquire
data while determining the best ways to obtain and process the desired information from inspections.
Upon completion of the workshop, participants will be able to use a drone to critically assess and
inspect various sites and to effectively interpret high quality data acquired from an inspected site.

Instructor T. Visintainer
Sundays, 6/29/25 - 8/10/25
10:30 am - 1:30 pm
Room C143
iMET Center

Questions: Contact Steve Whitmoyer whitmoyers@gtc.edu
 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-427E-1HDT
Sat & Sun, 8/2/25 & 8/3/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-427E-1HDO
Sat & Sun, 6/14/25 & 6/15/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-427E-1HDR
Sat & Sun, 7/19/25 & 7/20/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Mark Kandray
816-427E-1HDS
Sat & Sun, 7/26/25 & 7/27/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-424 Basic Motorcycle Basic Rider Course-2 (BRC2)

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse2-epackage2/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-424E-1HDF
Sat  7/12/25   7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148 
 

5th Grade to 12th Grade - Summer Maker Camp is a chance for your child to learn 3D printing, laser engraving, virtual reality and desktop CNC while they spend the week creating anything they can imagine. While 3D printers are more common now, this camp fosters problem solving and lateral thinking. Most of all your kids will have fun.

Instructor John Zehren 
Monday - Thursday 6/23 - 6/26
8:00 am - 12:00 pm 
Room 117
iMET Center
 

You must provide your own guitar and material for this workshop. This workshop runs for four sessions. You will receive training on 3D Printing, Laser Engraving and ShopBot CNC Router.  You are also responsible for any parts or upgrades you wish to apply.

Instructor John Zehren 
Four sessions Mondays, 7/28/25 through 8/18/25
5:30 pm - 8:00 pm 
Fab Lab 117A -117S
iMET Center