HAAS TRAINING

In this course, learners explore CNC machining concepts. They  examine setup and operation of CNC milling machines, and they  practice applying basic G code principles. Upon completion of the course, students will be able to program, setup, and operate a CNC mill.

Instructor Richard Shouse
Mon, Tues, Wed:  8/11/25 - 8/13/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

HAAS TRAINING
In this course, learners explore CNC machining concepts. They  examine the operation of CNC lathes and turning centers including  calling up programs, loading and unloading parts, inspecting parts, and monitoring tool wear. Upon completion of the course, students will be able to program, setup, and operate a CNC lathe.

Instructor Richard Shouse
Thurs, Fri, Sat  8/14/25 - 8/16/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

In this workshop, participants apply their knowledge and skills of drone flying to various
inspection aspects related to construction. They develop drone flight paths to inspect and acquire
data while determining the best ways to obtain and process the desired information from inspections.
Upon completion of the workshop, participants will be able to use a drone to critically assess and
inspect various sites and to effectively interpret high quality data acquired from an inspected site.

Instructor T. Visintainer
Sundays, 6/29/25 - 8/10/25
10:30 am - 1:30 pm
Room C143
iMET Center

Questions: Contact Steve Whitmoyer whitmoyers@gtc.edu
 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Craig Kehnemuyic
816-427E-1HDQ
Sat & Sun, 7/12/25 & 7/13/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-427E-1HDN
Sat & Sun, 6/7/25 & 6/8/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-424 Basic Motorcycle Basic Rider Course-2 (BRC2)

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse2-epackage2/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-424E-1HDF
Sat  7/12/25   7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148 
 

The full course description can be found at the following link: 816-424 Basic Motorcycle Basic Rider Course-2 (BRC2)

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse2-epackage2/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

 Instructor, Craig Kehnemuyi
816-424E-1HDE
Sat  6/14/25   7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148
 

5th Grade to 12th Grade - Summer Maker Camp is a chance for your child to learn 3D printing, laser engraving, virtual reality and desktop CNC while they spend the week creating anything they can imagine. While 3D printers are more common now, this camp fosters problem solving and lateral thinking. Most of all your kids will have fun.

Instructor John Zehren 
Monday - Thursday 6/23 - 6/26
8:00 am - 12:00 pm 
Room 117
iMET Center
 

5th Grade to 12th Grade - Summer Maker Camp is a chance for your child to learn 3D printing, laser engraving, virtual reality and desktop CNC while they spend the week creating anything they can imagine. While 3D printers are more common now, this camp fosters problem solving and lateral thinking. Most of all your kids will have fun.

Instructor John Zehren 
Monday - Thursday 8/4 - 8/7
8:00 am - 12:00 pm 
Room 117
iMET Center