This workshop runs for six sessions and uses pre-purchased guitar kit. You will receive training on 3D Printing, Laser Engraving and ShopBot CNC Router. No materials are required.

Instructor John Zehren 
Six sessions  - Tuesdays, 6/24/25 through 7/29/25
5:30 pm - 8:00 pm 
Fab Lab 117A -117S
iMET Center
 

HAAS TRAINING

In this course, learners explore CNC machining concepts. They  examine setup and operation of CNC milling machines, and they  practice applying basic G code principles. Upon completion of the course, students will be able to program, setup, and operate a CNC mill.

Instructor Richard Shouse
Mon, Tues, Wed:  8/11/25 - 8/13/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

HAAS TRAINING
In this course, learners explore CNC machining concepts. They  examine the operation of CNC lathes and turning centers including  calling up programs, loading and unloading parts, inspecting parts, and monitoring tool wear. Upon completion of the course, students will be able to program, setup, and operate a CNC lathe.

Instructor Richard Shouse
Thurs, Fri, Sat  8/14/25 - 8/16/25
8:00 am - 4:00 pm 
Room 267/120
iMET Center
 

This course is designed for civilians who wish to
meet the training requirements to obtain a
concealed carry license.  This course meets the
training requirement specified in Wisconsin
Statute 175.60(4).

504-465E-1KDB
Saturday, 8/2/25
7:30 am - 2:00 pm
Kenosha Campus 
Academic Building 
Room G001
Questions?? Contact Jimmie Spino at spinoj@gtc.edu

Fab Lab Summer Workshop: Integrating STEM into Your Curriculum

Join us for a hands-on training focused on key Fab Lab equipment, including 3D printing, laser engraving, and desktop CNC machines, along with the software used to operate them. This workshop is designed to help educators integrate STEM concepts into their curriculum.

NC3 Certifications Offered:

Dremel 3D Idea Builder

Dremel LC40 Laser Engraver

Details:
📅 Tuesday, July 29, Wednesday July 30 & Thursday, July 31
🕘 9:00 AM – 4:00 PM (Lunch provided)
👨‍🏫 Instructor: John Zehren
📍 Fab Lab Rooms 117A–117S, iMET Center
👥 Open to participants 18 years and older

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Craig Kehnemuyic
816-427E-1HDQ
Sat & Sun, 7/12/25 & 7/13/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 

The full course description can be found at the following link: 816-427 Basic Rider Course Description

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse-epackage1/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Craig Kehnemuyic
816-427E-1HDU
Sat & Sun, 8/9/25 & 8/10/25
7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148. 
 

The full course description can be found at the following link: 816-424 Basic Motorcycle Basic Rider Course-2 (BRC2)

YOU MUST COMPLETE THE MSF e-COURSE WITHIN 30 DAYS PRIOR to the start of class. Print and bring a copy of your completion certificate to class. If you do not YOU WILL NOT BE ABLE TO PARTICIPATE AND NO REFUND WILL BE GIVEN.

The MSF e-COURSE is at https://msf-usa.org/ecourses/basic-ridercourse2-epackage2/ This online e-COURSE is an additional charge of $39.99 and is not included in the cost of the workshop. The MSF-e COURSE takes an average of 5 hours to complete.

Instructor, Brian Cohen
816-424E-1HDF
Sat  7/12/25   7:00 am - 3:00 pm
Horizon Center - EVOC Track

Questions? Contact Brian Cohen, cohenb@gtc.edu, or 262-515-2148 
 

You must provide your own guitar and material for this workshop. This workshop runs for four sessions. You will receive training on 3D Printing, Laser Engraving and ShopBot CNC Router.  You are also responsible for any parts or upgrades you wish to apply.

Instructor John Zehren 
Four sessions Mondays, 7/28/25 through 8/18/25
5:30 pm - 8:00 pm 
Fab Lab 117A -117S
iMET Center